APELC's power supply for rapid capacitor charging, model PS-RCC-8-10 represents a revolution in capacitor charging for Marx generators. Designed as a turnkey solution to drive the APELC's family of Marx generators at high repetition rates, this component offers performance enhancements comparable to larger, bench-top supplies.
To download a PDF of this product, click here.
 
 

Partially & Fully Enclosed Rapid Capacitor Chargers
Suggested Complimentary Marx Generator
• MG15-3C-940PF - With a 600 kV erected voltage, high repetition rates and 50 ohm source impedance, this compact generator brings a high performance solution to such diverse applications as triggering and the direct generation of RF, employing one of APELC's modular high voltage antennas.
• MG15-3C-2700PF - APELC's 15 stage, 100 J Marx generator was specifically designed for ringdown, or dampened sinusoid RF applications. This generator brings an ultra compact geometry with high peak and average powers. This generator is characterized by a low inductance for quick pulse charging of capacitive loads or transmission lines, while being designed for high repetition rates.
• MG20-24C-2000PF - Referred to as "The Big Unit", this generator brings a new genre in Marx generator applications; direct sourcing of low impedance loads, such as required by various High Power Microwave diodes. The Big Unit brings a patent-pending parallel switching topology that enables the generator to operate with a 15 ohm source impedance and distributed current conduction. As a result, this 1 MV generator can deliver more than 1 kJ with repetition rates in the 10's of Hertz.
• MG40-3C-2700PF - Originally designed for driving flash x-ray diodes, this generator has operating characteristics that extend its use beyond radiography. With fast voltage rise times and swift charge cycles, this generator is well suited for extreme trigger applications, direct RF generation or High Power Microwave applications.
Features
• 10 kJ per second average power
• 100 J per second at 100 Hz
• External, fiber optically-connected controller
• 10-40 kV output voltage
• AC or DC customer defined supply voltage
• 9" Diameter / 12" long cylinder
  Terms
  FOB:
Austin, Texas
  Delivery:
16 weeks, depending on stocked materials. Inquire for specific lead times.
  Deposit:
25%
  Taxes:
Federal, State, and Local taxes are the responsibility of purchaser
  Export:
Export license required for all shipments outside the U.S.
  Note:
All terms, conditions, and information subject to change at APELC discretion.