| Products - System Solutions - MG15-3C-2700PF-HRR | ||||||||||||||||||||||||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||||||||||||||||||||||||
 MG15-3C-2700PF-HRR-SYS Marx generator output flange with fiber-optic hand held remote control. | ||||||||||||||||||||||||||||||||||||||||||||||||
|
High Repetition-Rate Marx Generator Integrated System MG15-3C-2700PF-HRR-SYS 4 GW 600 kV |
||||||||||||||||||||||||||||||||||||||||||||||||
|
KEY PARAMETERS
• 600 kV open-circuit output voltage • 100 Hz rep-rate • Requires only pressurized air, AC line power • 4 GW peak power to matched load • 10 kJ/s average power • Fiber-optic handheld controller APELC MG15-3C-2700PF-HRR-SYS General Specifications
TECHNOLOGY SUMMARY
The APELC MG15-3C-2700PF is a fully integrated, high power, moderate energy Marx generator system. The system is based on APELC's 100 J, 600 kV Marx generator, and integrates APELC's high voltage rapid capacitor charger (PS-RCC-8-10), which has been additionally configured to provide trigger and control functions. At maximum performance, the system delivers 4 GW of peak power and 10 kW of average power, with a maximum repetition rate of 100 Hz. Charge and trigger command is provided in a fiber-optic hand-held remote control. All that is needed at the end user facility is a 200 PSI air source and an AC wall outlet. |
||||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||||
Matched load output pulse of the MG15-3C-2700PF-HRR-SYS Marx generator. | ||||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||||
Input flange (right) of the MG15-3C-2700PF-HRR-SYS Marx Generator with integrated Rapid Capacitor Charger power supply. | ||||||||||||||||||||||||||||||||||||||||||||||||
|
SUGGESTED PERIPHERALS
RG-220, 50Ω coaxial cable Inline, coaxial Current Viewing Resistor Inline, capacitive voltage probe APELC integrated pressurized load module
SYSTEM REQUIREMENTS
150 psi dry air source 270 VDC Prime Power
|
