Home » Marx Generators » MG15-3C-940PF

Marx Generator

MG15-3C-940PF

Part Number: MG15-3C-940PF

Due to its compact size, 50 Ohm source impedance, and ideal pulse-characteristics, the MG15-3C-940PF has become APELC’s workhorse Marx Generator. With use in a wide variety of applications, including high-powered RF, triggering of larger pulsed power system, vehicle stopping, and materials studies; this generator represents the highest level of technical readiness in APELC’s family of Marx Generators. The generator is capable of delivering 300 kV onto 50 Ohms (600 kV open-circuit), a peak power of approximately 1.7 GW, fast rise-times (800 ps to 5 ns depending on additional peaking), and a moderate pulse width (~25 ns). Because of its well-understood thermal characteristics, this Marx Generator is also capable of operating with very high (>100 Hz) repetition rates for short durations.

CHARACTERISTICS

With a 600 kV open circuit voltage, the MG15-3C-940PF is capable of delivering 300 kV into a 50 Ohm load, with a peak power of approximately 1.7 GW. The generator is also capable of operating with very high repetition rates for short durations.

  • Maximum open-circuit voltage: 600 kV
  • Maximum peak voltage into matched load: 300 kV
  • Maximum repetition rate: 20 Hz
  • Energy per pulse: 33 J
  • Pulse rise-time: 3 – 5 ns, 800 ps – 2 ns with additional peaking hardware

PRODUCT OVERVIEW

The following items are included with the MG15-3C-940PF:

  • Marx Generator
  • High-voltage cable with quick connect
  • High-voltage power supply cable with quick connect
  • High-voltage trigger cable with quick connect
  • Two additional stages

The following items are required for proper implementation of the MG15-3C-940PF:

  • High-voltage capacitor charging power supply
  • High-voltage trigger unit
  • Pressurized breathable dry air source
Parameter Description Value Unit
N Number of Marx Generator stages 15
Epulse Maximum Marx energy per pulse 33 J
Pmax Peak power to a matched load 1.7 GW
Vch Marx maximum charge voltage 40 kV
VE Peak Erected voltage 600 kV
Cstage Capacitance per Marx stage 2.8 nF
CE Erected capacitance 188 pF
Le Series Inductance 510 nH
Zm Marx Impedance 52 Ohm
L Marx Generator Length 31 In.
D Marx Generator Diameter 5 In.
PRFmax Maximum Burst-Mode PRF 20 Hz

HIGH-VOLTAGE COMPONENT ADD-ONS

APELC’s selection of add-on features for high-voltage components are designed to increase safety and usability.

CONNECTORS

Rugged high-voltage quick disconnect cable connectors for voltages up to 700 kV.

DIAGNOSTICS

Integrated high-speed current diagnostics in high-voltage quick disconnects.

SOFTWARE

Software to increase user safety and reduce time spent in testing.

TERMINATION

Termination and monitoring capability for a high-voltage, high-power pulse without radiating equipment.

TRIGGER GENERATORS

Providing the trigger pulse to a Marx Generator through a pulse forming circuit.

POWER & CONTROL RACKS

Fully integrated power and control units to deliver a turnkey package for our pulsed power systems.

REQUEST A QUOTE

For more information or to discuss a custom or turnkey system, complete the form below and we will contact you within 24 hours.

Start typing and press Enter to search