Home » Marx Generators » MG17-1C-940PF

Marx Generator

MG17-1C-940PF

Part Number: MG17-1C-940PF

Nearly identical to APELC’s MG-1C-500PF Marx Generator, the MG17-1C-940PF uses a larger stage capacitor for slightly more energy. This 17-stage Marx Generator is designed primarily for the direct generation of RF. It does this via connection of the generator to the antenna, through a high-voltage coaxial cable.

With a ~200 ps rise-time, this generator is well-suited for shock-exciting a variety of antenna geometries, including TEM horns, helical antennas, monopoles and dipoles. It is capable of delivering 255 kV into a matched load, or as much as 510 kV into an open-circuit. The generator is designed to deliver 7 J per pulse and has an impedance of approximately 116 Ohm, resulting in a maximum peak power of approximately 600 MW.

CHARACTERISTICS

  • Maximum open-circuit voltage: 510 kV
  • Maximum peak voltage into matched load: 255 kV
  • Maximum repetition rate: 10 Hz
  • Peak power (matched load): 600 MW
  • Energy per pulse: 7 J
  • Pulse rise-time: 200 ps

PRODUCT OVERVIEW

The following items are included with this Marx generator:

  • Marx Generator
  • High-voltage cable with quick connect
  • High-voltage power supply cable with quick connect
  • High-voltage trigger cable with quick connect
  • Two additional stages

The following item is required for proper implementation of this Marx Generator:

  • High-voltage, constant voltage power supply
  • High-voltage trigger unit
  • Pressurized breathable dry air source
Parameter Description Value Unit
N Number of Marx Generator stages 17
Epulse Maximum Marx energy per pulse 7 J
Pmax Peak power to a matched load 560 MW
Vch Marx maximum charge voltage 30 kV
VE Peak Erected voltage 510 kV
Cstage Capacitance per Marx stage 500 pF
CE Erected capacitance 55 pF
Le Series Inductance 745 nH
Zm Marx Impedance 116 Ohm
L Marx Generator Length 42 In
D Marx Generator Diameter 3 In
PRFmax Maximum Burst-Mode PRF 10 Hz

HIGH-VOLTAGE COMPONENT ADD-ONS

APELC’s selection of add-on features for high-voltage components are designed to increase safety and usability.

CONNECTORS

Rugged high-voltage quick disconnect cable connectors for voltages up to 700 kV.

DIAGNOSTICS

Integrated high-speed current diagnostics in high-voltage quick disconnects.

SOFTWARE

Software to increase user safety and reduce time spent in testing.

TERMINATION

Termination and monitoring capability for a high-voltage, high-power pulse without radiating equipment.

TRIGGER GENERATORS

Providing the trigger pulse to a Marx Generator through a pulse forming circuit.

POWER & CONTROL RACKS

Fully integrated power and control units to deliver a turnkey package for our pulsed power systems.

REQUEST A QUOTE

For more information or to discuss a custom or turnkey system, complete the form below and we will contact you within 24 hours.

Start typing and press Enter to search